The is a rounded bottom over weeks: the price falls from the old high, rounds off and climbs almost back to it. Then comes a small, flat dip, the handle. The pattern is detected at the first close above the right rim. Wicks in the handle up to 0.5 ATR above the rim do not count; a higher wick discards the pattern or becomes the rim itself if a handle still follows.
Round, not V
The cup is 12 to 40% deep and 30 to 150 candles long, the right rim lies at most 10% of the depth from the left one. For us round is measurable: at least 30% of the closes lie in the lower fifth of the depth. An even V bottom has only about 20% there – in the model 18%, the round cup 41%.
The handle
It follows 3 to 25 candles after the right rim, is at least 0.5 ATR and at most a third of the cup depth deep and stays in the upper half of the cup. In the model: left rim 100.00, bottom 78.00, right rim 99.00, handle down to 95.50. At candle 95 the price closes at 100.20 above the right rim.
Zone, stop and targets
Zone 99.00–100.00, stop 94.50 (handle low minus 0.5 ATR). For the checks the depth counts from the left rim (22.00), for the targets from the right rim: 99.00 − 78.00 = 21.00. Target 1 = 99.00 + 21.00 = 120.00, target 2 = 99.00 + 1.618 × 21.00 = 132.98. Textbooks use the pattern height as the target; target 2 is our calculation.
Guide: cup and handle step by step
The cup and handle is a rounded bottom over weeks or months. The price falls from a high, lingers at the bottom, climbs almost back to the old high and then makes a small pullback, the handle. The breakout above the right rim completes the pattern. The rounded shape is what matters: a quick V does not count as a cup for us.
Detection step by step
- Bottom of the cup: one of the last four lows with a 3 swing (daily chart).
- Left rim: the highest high in the 150 candles before the bottom. The cup is 12 to 40% deep, measured from the left rim.
- Right rim: the highest high after the bottom before the low of the handle. The right rim lies at most 10% of the depth away from the left rim.
- Length and position: 30 to 150 candles from rim to rim, the bottom at least a quarter of this length away from both rims.
- Roundness: at least 30% of the closes in the cup lie in the lower fifth of the depth, measured from the lowest close. After that the bottom is not undercut.
- Handle: 3 to 25 candles after the right rim, at least 0.5 ATR and at most a third of the cup depth deep, with its low in the upper half of the cup.
- Trigger: the first daily close above the right rim.
Wicks in the handle
Shortly before the breakout a sometimes pokes above the rim without the day closing above it. We ignore such wicks up to 0.5 ATR above the rim; the rim stays where it was. A higher wick discards the pattern or becomes the new rim itself if a handle of at least three candles still follows.
Zone, stop and targets
The zone runs from the right rim up to 0.5 ATR above it, the stop lies 0.5 ATR below the low of the handle. For the targets the depth from the right rim counts: target 1 = rim + depth, target 2 = rim + 1.618 × depth. Textbooks use the simple depth as the target.
Worked example with model figures
ATR 1.50. Left rim 80.00, bottom 64.00: the cup is 16.00 or 20% deep. The right rim lies at 79.20, only 0.80 or 5% of the depth away from the left one. The handle falls to 76.00, so it is 3.20 deep – more than 0.5 ATR (0.75), less than a third of the depth (5.33) and above the middle of the cup (72.00). The first close above the rim is at 79.60. Zone 79.20 to 79.95, stop 76.00 − 0.75 = 75.25. Depth from the right rim 79.20 − 64.00 = 15.20, target 1 = 94.40, target 2 = 79.20 + 1.618 × 15.20 = 103.79.
False breakout and invalid cups
If the price falls to the stop below the handle low after the breakout, the pattern ends. If the handle is deeper than a third of the cup or reaches into the lower half, it is more of a new decline. A V-bottom with only around 20% of the closes in the lower fifth fails the roundness rule. If the price runs straight over the rim without a handle, we detect no cup.
Volume
For the cup, volume is not a condition; the checklist shows it at the breakout. Then there is cleanliness: the difference between the two rims as a percentage of the depth. Up to 5% the shape counts as clean.
Timeframes
On the weekly chart a cup lasts 15 to 75 candles and is 15 to 50% deep, the handle lasts 2 to 13 candles. On 4H it is at most 120 candles long and 8 to 40% deep. Zone, stop and targets on 4H and 1W are available from Premium.
Frequently asked questions
How reliable is a cup and handle?
The cup is well known and popular, yet it offers no assurance. How often a pattern has reached target 1 before the stop so far, we show with Premium as a past figure – not as a forecast. Our rules make sure that only rounded, not too deep shapes with a flat handle are detected; whether you trade is your decision.
How long does a cup and handle take?
On the daily chart 30 to 150 candles from rim to rim, so roughly six weeks to seven months. Add 3 to 25 candles for the handle.
How deep can the handle be?
At least 0.5 ATR, so that it is a pullback at all, and at most a third of the cup depth. The handle low also stays in the upper half of the cup.
What is the difference between a U-bottom and a V-bottom?
A U-bottom lingers at the bottom, a V-bottom turns at once. We measure this: if at least 30% of the closes lie in the lower fifth of the depth, the bottom counts as rounded. An even V-bottom only reaches around 20%.
How do I calculate the price target of a cup?
Take the depth from the right rim down to the bottom. Target 1 is the rim plus this depth, target 2 the rim plus 1.618 times it.