Range breakout and relative volume

Level: Beginner 4 minutes · Last reviewed on Oct 13, 2026

In a the price swings between top and bottom. If it breaks out upward, our detection asks for the volume: the divides the volume of the breakout candle by the average of the 20 candles before (daily chart). The breakout only counts from 1.5 times. High turnover shows that many take part; a breakout on thin turnover is considered weak.

What counts as a range

At least 20 candles, a span from the highest high to the lowest low of at most 3 ATR, at least two touches at the top and at the bottom with 3 candles in between. A wider span is more of a trend channel or noise – in the model the exercise reports nothing once the height is above 6.00 (3 ATR). We only report the breakout upward.

The model, recalculated

Range 100.00–105.00 over 33 candles, span 2.5 ATR. At candle 54 the price closes above the top at 106.20, on 2.0 times the volume. Zone 105.00–106.00, stop 102.50 in the middle of the range, target 1 = 105.00 + 5.00 = 110.00, target 2 = 105.00 + 2 × 5.00 = 115.00. Textbooks use the pattern height as the target; target 2 is our calculation.

Same word, different number

The screener’s RVOL column compares the last trading day with the 50 days before. Chart patterns use the previous 20 candles on the daily chart, because the breakout is compared with the most recent phase, and on 4H the last 10 blocks at the same time of day. More than two missing volume values mean: not met. Exception on 4H: if hourly data is missing on a day, the condition is dropped for that day; the checklist shows “no data”.

Try it Model numbers, not real prices

Things to try

  • Play to the breakout and then lower the volume below 1.5: what does the detection report?
  • Raise the height of the range above 6: from when is it no longer a range?
  • Compare target 1 and target 2 at height 4 and 6.

Guide: range breakout with volume

4 min read

A trading range is a sideways phase: the price swings between an upper and a lower edge. The breakout above the upper edge is one of the simplest patterns. A breakout that hardly anyone joins, however, falls back easily. That is why our detection requires clearly increased volume here.

Model chart: the price swings between two horizontal lines, then closes above the upper line with a tall volume bar; on the right zone, stop in the middle of the range and two target lines. Model chart: the price swings between two horizontal lines, then closes above the upper line with a tall volume bar; on the right zone, stop in the middle of the range and two target lines.
Model candles, not real prices. Blue: upper and lower edge, below the volume with the threshold 1.5 × average (dashed), dot: trigger, grey area: zone, red: stop, green: targets.

Detection step by step

  1. Find the range: the last at least 20 candles before the breakout, as long as possible, at most 120.
  2. Check the span: from the highest high to the lowest low, measured with wicks, at most 3 .
  3. Count the edges: at the top and bottom the price touches the edge at least twice (within 0.25 ATR). Touches only count with at least 3 candles between them; a dip made of neighbouring candles counts once.
  4. Trigger: the first daily close above the range high.
  5. Volume: the volume of the breakout candle divided by the average of the previous 20 candles is at least 1.5.
  6. Calculate zone, stop and targets.

Zone, stop and targets

The zone runs from the range high up to 0.5 ATR above it. The stop lies in the middle of the range: if the price falls back there, nothing is left of the breakout. The pattern height is the span of the range. Target 1 = range high + span, target 2 = range high + twice the span. Textbooks usually use only the simple span as the target.

Worked example with model figures

A range between 20.00 and 22.00 lasts 40 candles, the ATR is 0.80. The span of 2.00 equals 2.5 ATR and stays below the limit of 3 ATR. There are three touches each at the top and bottom. Then the price closes at 22.30, with a volume of 1.8 million shares against an average of 1.0 million over the previous 20 candles: 1.8. Zone 22.00 to 22.40, stop 21.00, target 1 = 24.00, target 2 = 26.00. Had the volume been only 1.3 million, the detection would not have reported the breakout.

Spotting a false breakout

A false breakout (often called a fakeout) starts like a real one: the price closes above the upper edge. Then it falls back into the range. Volume alone does not protect against this, but it filters out breakouts that carry hardly any turnover. For us the pattern ends as soon as a low reaches the middle of the range. If the latest breakout has failed, no older one counts either.

Reading volume correctly

If more than two volume values are missing in the window of 20 candles, the condition counts as not met – data gaps would distort the average. On 4H we compare with the last 10 blocks at the same time of day, because volume differs by time of day (for US stocks the afternoon with the closing auction usually carries more). At least 5 comparison blocks are needed, at most 2 of them without volume. On 4H there is an exception: if hourly data is missing on a day, the volume condition is dropped for that day; the checklist then shows “no data”. The RVOL column in the screener measures something else: the last trading day against the average of the 50 days before.

Timeframes

On the weekly chart a range spans 10 to 60 candles and may additionally be at most 25% high; a weekly range with a 40% span would not be a sideways phase. On 4H the same lengths apply as on the daily chart. Zone, stop and targets on 4H and 1W are available from Premium.

Frequently asked questions

What is a range breakout?

The price moves sideways between two prices for a while and then closes above the upper edge for the first time. For us this only counts with a narrow span (at most 3 ATR), at least 1.5 times the volume and a sideways phase of at least 20 candles (daily chart; 10 on the weekly chart).

Why does a breakout need volume?

Volume shows how many shares changed hands. A breakout on high turnover means that many market participants accept the new price. A breakout on thin turnover can be reversed by a single larger order. Even so, high volume is no assurance.

What is a false breakout (fakeout)?

A breakout after which the price quickly falls back into the range. Some traders therefore wait for a second close above the line or for a pullback to the upper edge. Our detection reports the first close above the range high valid at that point with enough volume; how you proceed from there is your decision.

Why is the stop in the middle of the range?

Just below the range high the price is still moving within the old span – a stop there would be hit by normal swings. The middle is a clear point: if the price falls back there, nothing is left of the breakout.

How do I calculate the price target of a range breakout?

Target 1 is the range high plus the height of the range, target 2 the range high plus twice the height. For a range from 20 to 22 that is 24 and 26. The calculation does not say whether the price gets there.

Quick check

Currently detected: stocks with this pattern →

Range breakouts in the screener →

↑ ↓ select · Enter open · Esc close