ATR (Average True Range)

Term explained · 2 min read · Last reviewed on Nov 9, 2026

The ATR (Average True Range) is the average range of a candle, usually averaged over the last 14 candles.

What does the ATR mean?

For each candle the “true range” is determined: the largest of three distances, high minus low, high minus previous close and previous close minus low. That way overnight gaps count too. These ranges are turned into a smoothed average over 14 candles. The ATR has the same unit as the price, so euros or dollars. The ATR says nothing about direction, only about how far a stock usually moves.

Example with model figures

A model stock closes at 100.00. The next day it opens at 103.00, rises to 104.00 and falls to 101.50. High minus low gives 2.50, but high minus previous close gives 4.00 – the true range is 4.00. If the true ranges of the last 14 days average 2.50, the ATR is roughly 2.50 – the smoothing weights recent days slightly more. At a price of 100 that is 2.5% of the price; half an ATR is 1.25.

How to read it

The ATR makes distances comparable: 2 euros means a lot for a calm stock and little for a volatile one. Measured in ATR, the price level does not matter. That is why many traders set stops, buffers and position sizes in ATR. The ATR reacts slowly, though: after a sudden drop it only rises over several days. And it is not a risk measure for the whole holding period, only for the usual move per candle.

Common mistakes

A high ATR is often read as a sign of a strong trend. The ATR only shows fluctuation, also in a sideways market with large swings. A second mistake is to compare the ATR of different stocks in euros; the ATR as a percentage of the price is better suited. Third, a stop is often set too tight, for example a quarter ATR below the entry. Then an ordinary daily move is enough to trigger it, although nothing has changed in the picture.

How to use it on TickerEagle

In the screener you find the ATR as a percentage under “More columns”. Our chart pattern detection measures tolerances, zones and stops in ATR, and the status “near” means at most 1 ATR above the zone.

Related terms

↑ ↓ select · Enter open · Esc close